+86 136 8649 1257
CL20 225J 250V 2.2uf Metal Film Capacitor — prepared for engineering comparison, sample validation and B2B procurement.
INTRODUCTION
| Procurement Field | Confirmed Current Record |
|---|---|
| Product / Model | CL20 225J 250V 2.2uf Metal Film Capacitor |
| Product Type | CL20 Axial Film Capacitor |
| Capacitance | 2.2uf |
| Rated Voltage | 250v |
| Tolerance | H= ±3%H; J=+5%; K=+10%; M=±20% |
| Lead Pitch / Dimensions | p=20mm, 25mm and customized |
| Operating Temperature | -40℃~ +85℃ |
| Expected Life | 2000hour-8000hour |
| Color / Finish | Red or custom |
| Package Type | Through Hole, Tape, Reel |
| Packing | Standard package box |
| Sample Support | support for free samples |
| Available Documentation | ISO9001 ISO4001 ROSH SGS CE |
| Supply Format | Original manufacturer, ODM/OEM |
Product Information
A product-specific engineering and procurement guide for CL20 225J 250V 2.2uf Metal Film Capacitor, built around 2.2uf, 250v and p=20mm, 25mm and customized.
An axial-format CL20 film capacitor for assemblies that require controlled capacitance, voltage and end-to-end lead integration.
Final suitability depends on the exact waveform, temperature, construction and approved mechanical sample.
Confirm body length, lead length, mounting span and mechanical retention.
Review voltage, tolerance, frequency and temperature as one application window.
Compare the original envelope and lead arrangement before approving an alternate.
Submit drawing, quantity and inspection needs with the electrical target.
Fix the electrical target. Confirm 2.2uf, 250v, tolerance and circuit function.
Describe the waveform. Provide frequency, current, pulse width and repetition rate where applicable.
Check temperature. Include ambient, heat sources, airflow and acceptable case rise.
Approve mechanical fit. Verify p=20mm, 25mm and customized, body envelope, clearance and assembly process.
Release the sample. Record model, drawing, test conditions, acceptance limits and documents.
Review steady voltage, transients, frequency, current or pulse duty and temperature as one operating envelope.
Do not approve an alternate from capacitance and voltage labels alone.
Confirm p=20mm, 25mm and customized, body dimensions, PCB clearance, lead forming and production handling.
Release the production footprint from the drawing or approved sample.
Evaluate voltage stress, waveform, temperature and mechanical fit before production release.
Evaluate voltage stress, waveform, temperature and mechanical fit before production release.
Evaluate voltage stress, waveform, temperature and mechanical fit before production release.
Evaluate voltage stress, waveform, temperature and mechanical fit before production release.
| Risk | Engineering Prevention |
|---|---|
| Axial span mismatch | Confirm body and lead dimensions against the board or harness. |
| Lead stress | Provide support and avoid bending stress at the body seal. |
| Electrical overstress | Check nominal and transient voltage with the waveform. |
| Temperature accumulation | Validate loss and case temperature in the enclosure. |
| Validation Step | Evidence to Record |
|---|---|
| Incoming baseline | Part marking, capacitance, dimensions, lead condition and appearance. |
| Functional circuit test | Voltage waveform, frequency, current or pulse condition and system behaviour. |
| Thermal check | Ambient, warm-up time, case temperature and cooling arrangement. |
| Mechanical approval | Pitch, body envelope, clearance, mounting stability and assembly process. |
Product code, capacitance, tolerance and rated voltage
Circuit function, waveform, frequency and pulse or current conditions
Ambient temperature, cooling and expected duty cycle
Lead pitch, maximum body dimensions and PCB or enclosure drawing
Sample quantity, annual demand, packaging and labeling requirements
Required inspection, compliance and project documents
Send the circuit duty and mechanical envelope. LORIDA can organize the quotation, drawing review, sample plan and OEM requirements around the selected configuration.
No. Frequency, waveform, temperature, tolerance, mechanical fit and circuit position must also be reviewed.
Confirm body length, lead length, mounting span, bend radius and mechanical support.
Send the target code, circuit function, voltage waveform, frequency, temperature, dimensions, quantity, packaging and documentation needs.
Yes. Feasibility depends on the selected construction, electrical target, order quantity and approved sample.
Compare the controlled drawing and electrical duty, then repeat functional and temperature validation in the target circuit.
RELATDE PRODUCTS
Shenzhen Lorida Technology co., Ltd was established in 2014. The company is located in Longhua district, Shenzhen city. The production factory is located in Heshan district, Yiyang city, Hunan province.
Request product information
Please leave your request for any product you wish. We will be happy to search it for you in our databases.
